Cisco 700 User Manual
Page 48
Where To Go From Here
Cisco 700 Series Router Installation Guide
3-12
If your router is not preconfigured, gather the information listed in Cisco 700 Quick
Reference Guide. This information is commonly available from your ISDN service
provider (telephone company) and the network administrator of the central site network or
your Internet service provider.
Cisco strongly recommends that you use the Cisco 700 Fast Step Setup application unless
you have been instructed to do otherwise. Cisco 700 Fast Step applications are located on
the CD-ROM inside the Cisco 700 Quick Reference Guide.
If you are an experienced user and want to use the command-line interface (CLI) to
configure the software or have been instructed to do so, refer to the Cisco 700 Series
Command Reference for a list of the commands and some configuration examples.