Roland RSS-10 - Manual (Page 13)

OUTPUT MODES
You can select one of the three Output Modes that determine the format of the signal to be output through the Output Jack
on the RSS-10.
SPEAKER Mode
This mode allows you to output the signal in the format for normal stereo speaker playback.
HEADPHONES Mode
This mode allows you to output the signal in the format for headphone playback. The binaural
sound can be heard as three-dimensional sound through headphones even when being output in
the Binaural Mode. To obtain an enhanced effect, however, you should output in the Headphones
Mode.
BINAURAL Mode
In this mode, the Binaural sound will be output as is.
* The Binaural sound is the basic signal format handled in the RSS System. Once the Binaural
sound is converted to signals for stereo speakers or stereo headphones, it cannot be returned
to the original Binaural sound. Therefore, you should save the three-dimensional sound created
in the RSS System while it is in the Binaural sound format.
13