Delay modes – Roland RSS-10 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
DELAY MODES
You can select whether or not to use the Doppler effect.
ABSOLUTE DELAY Mode
If you want the Doppler effect to occur by moving the sound source, select the ABSOLUTE DELAY
Mode. When this mode is selected, the delay time added to the sound will differ depending on the
distance between the sound source and your ears. The change of the sound pitch caused by the
Doppler effect will also differ.
RELATIVE DELAY Mode
If you do not want the Doppler effect to occur by moving the
sound source,
select the RELATIVE
DELAY Mode. When this mode is selected, no delay is caused in the sound.
14
Advertising