1 -7 size (room size), Note, 1 -8 time (reverb time) – Roland RSS-10 User Manual
Page 24: 9 wall color (wall coior), 10 flavor (flavor type), 11 floor distance (floor distance), 12 floor color (floor color), 14 abs/rel (delay mode) (delay mode)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 -7 Size (Room Size)
The Room Size is the approximate size of the space where the sound will reverberate. Set it to suit
your taste as you listen to the sound.
<Note>
The Reverb Time is restricted depending on the Room Size selected. If the current Reverb Time
exceeds the maximum range by changing the Room Size, the Reverb Time will be automatically
changed to the highest or lowest value of the maximum range. For example, if the Room Size is set
to 100 m, the Reverb Time will be restricted to above 1.0 second. When the Room Size is 1 m, the
Reverb Time will be restricted to lower below 4.0 seconds.
1 -8 Time (Reverb Time)
Reverb Time is the approximate time for the sound to start reverberating until it fades out. Adjust
it to suit your taste as you actually listen to the sound.
<NOTE>
The Reverb Time is restricted to a certain time depending on the Room Size selected. However, if
the Reverb Time exceeds the maximum level of the current Room Size, the setting of the Room Size
will be automatically changed.
1-9 Wall Color (Wall Coior)
Wall Color simulates the tonal changes in a sound that occur while sound reflected from walls is
reverberating. Set it to suit your taste while you actually listen to the sound.
1-10 Flavor (Flavor Type)
Flavor Type is a parameter related to the reverb tone. When you input various sounds created from
the same source into several RSS-1 Os and mix them, the reverberant sounds may interfere with each
other and produce an odd sound orientation. Should this occur, set the Flavor Type on each RSS-
10 to a different value. The Flavor Type changes the tone only subtly, and therefore will have no
effect if you adjust it in situations other than the above.
1-11 Floor Distance (Floor Distance)
This determines the distance from your ears to the sound source.
1-12 Floor Color (Floor Color)
The tone of the sound reflected from a floor differs depending on the material of the floor. Set it to
suit your taste.
1-13 Reflection (Reflection) (Coefficient of the floor reflection)
This sets the ratio of the floor reflection. Set it to suit your taste.
1-14 ABS/REL (Delay Mode) (Delay Mode)
This sets the Delay Mode. For details, see "DELAY MODES" on page 14.
24