Changing the function modes, Changing the output modes, Demo play – Roland RSS-10 User Manual
Page 22: On/off of bypass
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating the RSS-lO’s control panel using the MCR-8
Changing the Function Modes
Change the Function Modes using [Flying], [Stationary] and [Transaural] buttons.
Changing the Output Modes
Change the Output Modes using [Speaker] and [Headphones] buttons.
Demo Play
To play demonstration data, press [Demo On] to turn to the Demo Play mode. To return to the
Function Mode, press [Demo Off].
To change Demo Numbers, use [FI -F8, DEC, INC] as 0-9 numerical keys. First, specify the number,
then press [Enter].
To start playing the demonstration data you have selected, press [PLAY (► )].
To stop playing, press [STOPiB )].
To reset to the beginning of the demonstration play, press [RESET! M )].
*
If you stop playing with [STOP(U )] then press [PLAYO-)], the demonstration will resume from
where it was stopped.
ON/OFF of Bypass
The Bypass function can be turned on or off using the [Bypass On] and [Bypass Off] buttons.
22