Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual - Manual (Page 30)

Chapter 2: Programming
28 TruVision Analog PTZ Camera Configuration Manual
Note: You can configure up to eight tasks.
To set a task status:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE .
2. Move the cursor to STATUS and click IRIS+ to enter edit mode
3. Click the up and down buttons to set the task status to ON.
4. Click IRIS+ again to confirm and exit edit mode of this column.
To set a task action:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE .
2. Move the cursor to ACTION and click IRIS+ to enter edit mode
3. Click the up and down buttons to select a task action from the list: Preset 1-8, Shadow
Tour 1-4, Preset Tour 1-8, Panning scan, Tilting scan, Random scan, Frame scan,
Panoramic scan, Day mode, Night mode, Zero calibr or None.
4. Click IRIS+ again to confirm and exit edit mode of this column.
To set a task time:
1. Go to MAIN MENU > SYSTEM SETTINGS > SCHEDULE .
2. Move the cursor to TIME and click IRIS+ to enter edit mode
3. Click the up and down buttons to position the cursor at WEEK , START (H-M) and END
(H-M) .
Note: The weekday can be set to be from Monday to Sunday , or Whole Week .
4. Click the up and down buttons to select the specific day and time.
5. Click IRIS+ to confirm and exit.