Restore default camera settings, Reboot the camera – Interlogix TruVision 960H Premium Resolution Series PTZ Cameras Configuration Manual User Manual
Page 37
Chapter 2: Programming
TruVision Analog PTZ Camera Configuration Manual
35
To set tracking:
1. Go to
MAIN MENU
>
SYSTEM SETTINGS
>
TRACKING
.
2. Click
IRIS+
to enter edit mode.
3. Move the cursor on
ENABLE TRACKING
and click up/down buttons to enable tracking.
4. Click the right button to move the cursor to
TRACKING ZOOM
and click
IRIS+
.
5. Click
ZOOM+
or
ZOOM-
to change the zoom you want.
6. Click
IRIS+
to save the changes.
Restore default camera settings
You can reset all camera settings to factory default parameters.
Note: Camera settings are mainly of PTZ parameters and alarm parameters, and also
include some system settings, e.g. camera address.
To restore default settings:
1. Go to
MAIN MENU
>
RESET CAMERA
.
2. Click
IRIS+
to restore the camera settings to the default value or click
IRIS-
to exit.
Reboot the camera
Enter
MAIN MENU
>
REBOOT SYSTEM
and click
IRIS+
to reboot the PTZ camera
remotely.