Interlogix TruVision IP Camera Configuration Manual - Manual (Page 22)

2BChapter 3: Camera configuration
18 TruVision IP Camera Configuration Manual
No. Parameter Description
6. Frame Rate Specifies the frame rate for the selected resolution.
The frame rate is the number of video frames that are shown or sent
per second.
Note: The maximum frame rate depends on the camera model and
selected resolution. Please check the camera specifications in its
datasheet.
7. Max bit rate Specifies the maximum allowed bit rate. A high image resolution
requires that a high bit rate must also be selected.
Options include: 32, 48, 64, 80, 96, 128, 160, 192, 224, 256, 320,
384, 448, 512, 640, 768, 896, 1024, 1536, 1792, 2048, 3072, 4096,
8192, 16384 and Custom (enter a value manually).
Note: SD camera and sub stream of all models only support up to
8192Kbps.
8. Video Encoding Specifies the video encoder used.
9. Profile Different profile indicates different tools and technologies used in
compression. Options include: High Profile, Main Profile and Basic
Profile.
10. I-frame Interval A video compression method. It is strongly recommended not to
change the default value 50.
The TruVision IP opend standard camera has a default value of 25.
Video image
You may need to adjust the camera image depending on the camera model or
location background in order to get the best image quality. You can adjust the
brightness, contrast, saturation, hue, and sharpness of the video image. See
Figure 6 below.
Use this menu to also adjust camera behavior parameters such as exposure
time, iris mode, video standard, day/night mode, image flip, WDR, digital noise
reduction, white balance, and indoor/outdoor mode. See Figure 6 and Table 6
below for more information.