Interlogix TruVision IP Camera Configuration Manual - Manual (Page 23)

2BChapter 3: Camera configuration
TruVision IP Camera Configuration Manual 19
Figure 6: Camera image settings menu
Table 6: Image parameters
No. Parameter Description
1. Brightness, Contrast
Saturation, Hue, Sharpness Modifies the different elements of picture quality by adjusting
the position of the values for each of parameter.
2. Exposure Time The exposure time controls the length of time that the
aperture is open to let light into the camera through the lens.
Select a higher value if the image is dark and a lower value to
see fast moving object.
3. Iris Mode There are two settings, Auto and Manual. The type of lens
determines which setting is used.
4. Video Standard The camera cannot auto-sense the power supply.
Select 50 Hz (PAL) or 60 Hz (NTSC) depending on your
region.
5. Day/Night Switch Defines whether the camera is in day or night mode. The day
(color) option could be used, for example, if the camera is
located indoors where light levels are always good.
Options:
Day: Camera is always in day mode.
Night: Camera is always in night mode.
Auto: The camera automatically detects which mode to use.
Default is Auto.
6. Sensitivity Adjusts the sensitivity of the camera from night to day.
Options: Low, Normal, or High. Default is Normal.
7. Switch Time Adjusts the delay time of day/night switch.