Overlay text – Interlogix TruVision IP Camera Configuration Manual User Manual
Page 26
2BChapter 3: Camera configuration
22
TruVision IP Camera Configuration Manual
Note:
1. If you set the display mode as transparent, the text varies according the
background. With some backgrounds, the text may be not easily readable.
2. When you enable motion detection, it is recommended not to select the
flickering display option as overlay text may trigger a motion alarm.
Overlay text
You can add up to four lines of text on screen. This option can be used, for
example, to display emergency contact details. Each text line can be positioned
anywhere on screen. See Figure 7 below.
Figure 7: Text overlay menu
To add on-screen text:
1. In the
Image
folder, click the
Text Overlay
tab to open its window.
2. Check the box for the first line of text.
3. Enter the text in the text box.
4. Use the mouse to click and drag the red text in the live view window to adjust
the text overlay position.
5. Repeat steps 2 to 4 for each extra line of text, selecting the next string
number.
6. Click
Save
to save changes.