Interlogix TruVision IP Open Standards Outdoor Cameras User Manual User Manual
Page 13
Advertising
1BChapter 2: Installation
TruVision Outdoor IP Camera User Manual
9
4. Insert the dome module into the housing and pull the camera’s cables through
the threaded knockout on the base of the housing.
Note: The cables can also be passed through the threaded side knockout of
the housing. Use a waterproof conduit for the cables and seal all joints to
ensure so that no moisture can leak into the mounting surface.
Side knockout
5. Connect the network and power cables.
6. While viewing the video on the monitor, adjust horizontally and vertically the
camera pan and tilt. Adjust the lens focus to get optimal video effect.
Advertising