Interlogix TruVision IP Open Standards Outdoor Cameras User Manual User Manual
Page 28
2BChapter 3: Network and streaming configuring
24
TruVision Outdoor IP Camera User Manual
2. Click the
PPPoE setting
subfolder to open its window and check
Enable
PPPoE
. Enter the user name and password. Click
Save
to save changes.
3. Click the
DDNS setting
subfolder to open its window and check
Enable
DDNS
. Enter either IP server or DynDNS as protocol.
If DynDNS is selected, enter the user name and password registered to the
DynDNS web site. The domain name is that of the DynDNS web site. Click
Save
to save changes and return to the “Network settings” menu.
4. Click the
E-mail setting
subfolder to open its window and enter the SMTP
server, SMTP port, user name and password and the e-mail sender and
receiver addresses. Click
Save
to save changes.