Interlogix TruVision IP Open Standards Outdoor Cameras User Manual - Manual (Page 8)

1BChapter 2: Installation
4 TruVision Outdoor IP Camera User Manual
Package contents
Check the package and contents for visible damage. If any components are
damaged or missing, do not attempt to use the unit; contact the supplier
immediately. If the unit is returned, it must be shipped back in its original
packaging.
Package contents:
• Camera
• Hex wrench
• Video cable for testing (except bullet cameras)
• Quick start guide
• CD with user manual and TruVision Device Finder.
CAUTION: Use direct plug-in UL listed power supplies marked Class 2/CE
certified or LPS (limited power source) of the required output rating as listed on
the unit.
Cable requirements
For proper operation, adhere to the following cable and power requirements for
the cameras. Category 5 cabling or better is recommended. All network cabling
must be installed according to applicable codes and regulations.
Table 1 below lists the requirements for the power cables that connect to the
camera.
Table 1: Recommended power cable requirements
Bullet camera: 12 VDC power jack
Dome camera: 24 VAC power jack