Interlogix TruVision IP Open Standards Outdoor Cameras User Manual User Manual
Page 14
Advertising
1BChapter 2: Installation
10
TruVision Outdoor IP Camera User Manual
Pan
Lock screw
Rotate
Tilt
7. Reattach the dome liner and enclosure.
To mount the dome on a wall:
1. Use the supplied template to mark out the mounting area. Drill the screw
holes on the wall. If you need to route the cables from the camera base, cut a
cable hole in the wall.
Cable hole
2. Secure the housing to the wall with screws.
Note: Position the threaded side knockout facing downwards to prevent
moisture from entering the camera.
Advertising