Interlogix DVR 41 User Manual - Manual (Page 21)

TruVision DVR 41 User Manual 15
Chapter 3
Getting started
Turning on and off the DVR
Before starting the power up process, connect at least one monitor to the video
out or the VGA interface. Otherwise, you will not be able to see the user interface
and operate the device. Also connect at least one camera.
The DVR auto-detects the video mode (PAL or NTSC) on startup.
It is equipped with a universal power supply that will auto-sense 110/240 V,
60/50 Hz.
Note: It is recommended that an uninterruptible power supply (UPS) is used in
conjunction with the device.
To turn on the DVR:
Turn on the DVR using the power switch on the back panel. A splash screen
appears on screen.
Once the TVR 41 is powered up, the indicator bar on the front panel will light up
green. All connected cameras are displayed on-screen. The TVR 41
automatically begins recording.
To turn off the DVR:
1. In live view mode, right-click the mouse and click Menu . The main menu
screen appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Shutdown . Click Yes to confirm
shutdown.
To reboot the DVR:
1. In live view mode, right-click the mouse and click Menu . The main menu
screen appears.
2. Select the Power Manager icon.
3. In the Shutdown popup menu, select Reboot . Click Yes to confirm shutdown.