Interlogix DVR 41 User Manual - Manual (Page 47)

4BChapter 5: Live view
TruVision DVR 41 User Manual 41
Option Description
Enable wizard Define whether the wizard tool starts when the DVR is turned on.
Check the box to enable/disable and click Apply.
Figure 20: Monitor setup screen: More Settings
Table 13: Description of the Monitor setup screen: More Settings
Option Description
Monitor standard The video standard used is auto detected but can be manually
changed.
Modify the video standard used to PAL or NTSC and click Apply.
Output mode Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright,
Gentle, or Vivid.
Monitor brightness Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply.
Event hint Define whether the status icons appear on screen. See “Status
information” on page 29 for more information.
Timebar transparent Modify the transparency of the menus on-screen relative to the
background to make the menu screens easier to read or less
prominent on-screen. Default is non-transparent.
Select one of the options from the drop-down list.
Menu timeout Define the time in minutes after which the menu screen reverts to
live view mode.
Select a time from the drop-down list and click Apply.
Mouse pointer speed Modify the speed of the mouse pointer.
Adjust the scroll bar point to the desired level and click Apply.
Other notification: Panel
alarm LED Check to enable the Motion alarm option.
Motion alarm Define whether the status LEDs on the front panel start flashing
when motion is detected.
Check the box to enable/disable and click Apply.