Interlogix DVR 41 User Manual - Manual (Page 23)

2BChapter 3: Getting started
TruVision DVR 41 User Manual 17
Note: The system time and date are visible on screen. However, they do not
appear in recordings.
Click Next to move to the next page, or Previous to return to the previous
page.
7. Network configuration:
Configure your network settings such as the NIC type, IP address, subnet
mask and default gateway. Enter the preferred DNS server address as well
as the alternate one to use.
Click Next to move to the next page, or Previous to return to the previous
page.
8. HDD management:
Configure your HDD settings as required.
You can group HDDs and assign cameras to a group. See “Setting up HDD
groups” on page 122 for further information. You can also set up a drive for
redundant recording. See “HDD redundancy” on page 95.
After configuring your HDD settings, click Initialize and Next to move to the
next page, or Previous to return to the previous page.
9. Recording configuration:
Configure your recording settings as required. The settings apply to all
cameras connected to the DVR.