Interlogix NVR 21 (S/P) User Manual - Manual (Page 135)

TruVision NVR 21(S/P) User Manual 129
Chapter 15
Recorder management
This chapter describes:
 Configuring the RS-232 port
 Updating system firmware
 Restoring default settings
 Viewing system information
 Viewing system logs
Configuring the RS-232 port
Use the System Settings menu to configure the RS-232 parameters such as baud
rate, data bit, stop bit, parity, flow control, and usage.
Figure 40: RS-232 setup window
There are three ways the RS-232 port can be used:
 ProBridge: POS and ATM text insertion supported via the ProBridge accessory
connected to the RS-232 port. See “Capturing text insertions” on page 80 for more
information.