Brackets – Interlogix NVR 21 (S/P) User Manual User Manual
Page 16
Chapter 2: Installation
10
TruVision NVR 21(S/P) User Manual
Brackets
The recorder is easily rack-mountable with the purchase of the TVR-RK-1 rack-mount
kit. Contact your local supplier to order the kit.
The TVN 21S has a 1.5U 19-inch chassis and the TVN 21P has 2U 19-inch chassis.
See Figure 6 below.
Figure 6: Rack-mount installation
Attach the small front rack ears to the unit
(screws supplied)
Attach the recorder to the front rails
(screws not included)
To install the racks:
1. Attach the two small front-rack mount ears to the recorder (A). The screws are
supplied.
2. Attach the two large rear support brackets (screws are not supplied) to the rear rails
(B).
3. Attach the recorder to the front rails (C). The screws are not supplied.
Caution:
Do not rack-mount the recorder without the rear rails installed. Failure to install the rear
rails can damage the recorder.