Interlogix NVR 21 (S/P) User Manual - Manual (Page 86)

Chapter 9: Using the web browser
80 TruVision NVR 21(S/P) User Manual
Figure 31: PTZ controls
1. Directional pad/auto-scan buttons: Controls the
movements and directions of the PTZ. Center
button is used to start auto-pan by the PTZ dome
camera.
2. Adjust speed of PTZ dome camera.
3. Adjust zoom, focus, and iris.
4. Turn on or off the camera light (if available on the
camera).
5. Lens initialization: Initialize the lens of a camera
with a motorized lens, such as PTZ or IP cameras.
This function helps to maintain lens focus
accuracy over prolong periods of time.
6. Start or stop camera wiper (if available on the
camera).
7. Auxiliary focus: Automatically focus the camera
lens for the sharpest picture.
8. Start selected preset/tour/shadow tour (depending
on function selected).
9. List presets available.
10. List preset tours available.
11. List shadow tours available.
12. Modify brightness, contrast, saturation, and hue
values.
Capturing text insertions
Text insertion lets you insert or display text from a point-of-sale (POS) system on the
video display of the recorder. The text is saved and time
‐stamped together with the
video. You can then search the text for specific video clips. The text is displayed during
playback.
The recorder supports POS and ATM text insertion via the UTC ProBridge accessory
connected to the RS-232 port on the recorder. This feature is currently only available
using the browser.
In both live view and playback, a camera set up for text insertion will display the video
with the POS text overlay.
See Figure 32 below for an example of a video image in live view with text insertion.