Interlogix NVR 21 (S/P) User Manual - Manual (Page 156)

Appendix D: KTD-405 keypad
150 TruVision NVR 21(S/P) User Manual
Figure 42: Unavailable keypad buttons
DSC/VCR
Aux 1
Aux 2
Aux 3
Aux 4
Ist
Autofocus
Alarm
Iris +/-
Focus +/-
(Magnification)
(Record mode)
Store
Fast forward
Fast backward
Operating the keypad
You can navigate the recorder menus using the keypad buttons and joystick. However,
not all maneuvers are available using the joystick.
See Table 23 on page 151 for the description of the recorder keypad mapping when
using the KTD-405 keypad series. See Figure 42 above for a list of the keypad
functions that are unavailable when connected to the recorder.
Example 1: To enter your password in the login screen using the keypad
1. In live view mode, press esc to activate the Login screen.
2. Press and hold esc and then press the arrow buttons ( down , up , left ,
right ) to move the cursor to the Password edit box. Once in the password box,
release esc .
3. Press Enter ( ) to activate the soft keyboard.
4. Press and hold esc and then press the arrow buttons to reach the first digit of the
password. Release esc and press Enter ( ) to select the digit.
Or move the joystick to the first digit of the password and press Enter ( ).
5. Repeat steps 2 to 4 for each digit of the password.
6. Move the cursor to the Enter button on the soft keyboard and press Enter ( ) on
the KTD-405 keypad to quit the soft keyboard.
7. Press and hold esc and then press the arrow buttons to navigate the cursor to
activate OK button on the Login screen.