Interlogix NVR 21 (S/P) User Manual - Manual (Page 95)

Chapter 10: Recording
TruVision NVR 21(S/P) User Manual 89
toolbar. Click the manual record icon to start or stop manual recording. The icon is
red when recording.
• Use the configuration menu
This option lets you select more than one camera at a time. Go to Video Schedule
> Manual Record to access the manual recording menu and check the boxes of the
cameras to start or stop manual recording.
Motion detection schedules
For IP cameras you can configure from the recorder the schedule when the camera can
be triggered by motion. However, you need to configure the area of the video display
sensitive to motion from the camera itself.
For information on scheduling motion detections, see “Motion detection set up” on page
98.
External alarm schedules
The recorder can be scheduled to record when an alarm is triggered by an external
alarm device such as a PIR detector or dry contacts. For information on scheduling
external alarms, see “Setting up external alarms” on page 101.
Protecting recorded files
There are two methods to prevent recorded files from being inadvertently overwritten or
deleted off the HDD. We highly recommend that important recorded events be
protected from deletion. Recorded files can either be locked or the HDD that the files
reside on can be set to read only.
Locking and unlocking recorded files
Lock files to protect them against being overwritten or deleted.