Corinex Global Powerline Router - Manual (Page 24)

Configuring Windows 98 and Millennium PCs
1. Go to the Network screen by clicking the Start button. Click
Settings and then Control Panel. From there, double-click the
Network icon.
2. On the Configuration tab, select the TCP/IP line for the applicable
Ethernet adapter, as shown in Figure 2.6
Fig.2.6 Network
Do not choose a TCP/IP entry whose name mentions DUN, PPPoE,
VPN, or AOL. If the word TCP/IP appears by itself, select that line.
(If there is no TCP/IP line listed, refer to "Appendix D: Installing the
TCP/IP Protocol" or your Ethernet adapter’s user guide to install
TCP/IP now). Click the Properties button.
21
Step 2: Configuring Computer
Corinex Powerline Router User Guide