Corinex Global Powerline Router - Manual (Page 53)

Network Encryption Key
Select the Network Encryption Key tab from the Powerline tabs. The
following screen will appear:
Fig.3.11 Network Encryption Key
The Corinex Powerline Router is configured to work seamlessly with other
Corinex Powerline products right out of the box.
All Powerline devices must use the same powerline password, if they
should communicate together over powerline.
If the passwords are not the same, reconfigure the devices to ensure that
all devices have the same passwords.
Note: For Corinex Powerline Router, the default Network Encryption
Key is "HomePlug". The 56-bit DES encryption is always enabled for
Powerline data security as default.
This screen enables you to change the powerline password settings of the
embedded powerline adapter in the Router. You can choose which adapter
you want to configure in the Local Powerline Adapter field, then choose
whether you want to encrypt frames in the Encrypt frames checkbox. If
you selected Encrypt frames, you can enter the powerline password for
your adapter. The password can be 4-24 characters long. Press the Apply
button, when you want to enter the values into the Router.
50
Powerline Tabs
Corinex Powerline Router User Guide