Corinex Global Powerline Router - Manual (Page 48)

3.4 LAN Tabs
LAN Settings
Select the LAN Settings tab from the LAN tabs. The following screen will
appear:
Fig.3.5 LAN Settings
In this screen you can change the settings of your local area network. In
the IP Address and Subnet Mask fields you can change the IP address of
the LAN interface of your Router. The default value is 192.168.2.1, mask
255.255.255.0.
You can also switch on/off the DHCP server in the DHCP server field. Using
the IP Pool Starting address and IP Pool Ending address you can change
the values of the IP addresses assigned to the DHCP clients.
The DHCP address assignment can expire if the address is not used. This
value can be changed in the Lease time field. You can make changes from
a range of values:
45
LAN Tabs
Corinex Powerline Router User Guide