Corinex Global Powerline Router - Manual (Page 40)

D. In the WAN tab, select Connection Type. The following screen will
appear.
Fig.2.28 WAN Connection type Selection
The Corinex Powerline Router supports four connection types: Dynamic
(Obtain IP address dynamically), Static, PPPoE, and PPTP. The setup will
differ according to the type of your Internet connection, instructions are
included here. Follow the instructions E1 for Dynamic, instructions E2 for
Static, instructions E3 for PPPoE and instructions E4 for PPTP connection
type.
E1. Dynamic
- Select Dynamic from the Connection Type screen.
- If your ISP gave you the Host Name information, enter it into the
Host Name field.
- Some ISPs require you to change your Routers MAC address into
your previously connected Ethernet card. Click on Change WAN
MAC Address in order to change it.
- Click on Apply button.
- Continue to F.
37
Step 3: Configuring the Router
Corinex Powerline Router User Guide