Corinex Global Powerline Router - Manual (Page 82)

If you need to add a powerline device that is not connected to the
powerline now, you need to click on the Disconnected device check box.
This action will give the possibility to remember the Powerline devices for
future reference and use in an associated network structure.
Fig. 3.48 Adding a Powerline device - choosing Local and Powerline
networks.
In the following window place a check mark on the Agent item (Fig. 3.49).
Default Powerline Agent configuration values will appear, assuming the
Agent is running on a local PC or Router. You should enter the IP address
of your
Corinex Powerline Router in the Agent name/address field in this
dialog box. The insertions for the fields: Port, Read and Write community
must be in accordance with the naming of the Powerline Agent’s settings
(see SNMP Agent settings in the Powerline tab of the web based utility,
chapter 3.6) and after inserting these names and number settings, you
must click on the Next button to continue.
Fig. 3.49 Adding Powerline Device - Powerline Agent settings.
79
Setup of Router SNMP Powerline Agent
Corinex Powerline Router User Guide