Eclipse Combustion AIRHEAT AH-MA - Manual (Page 19)

Eclipse AH-MA Air Heat Burner v2, Design Guide 160, 8/1/05 19
Note:
To compensate for changes in actual air flow versus calculated,
provide adjustable profile plates so that final settings can be
made in the field. Figure 3.6 shows an example of an adjustable
profile plate design.
Figure 3.6 Adjustable Profile Plates
Figure 3.7 Profile Plate Positioning
Fixed
Profile Plate
Duct
Wall
Front View Side View
Elongated Screw Slots
AH-MA
Burner
Adjustable
Profile Plate
AH-MA
Burner
Profile
Plate
Profile
Plate
¼ to 1"
Caution:
Profiles plate should be positioned
upstream of the firing end of the
burner. If necessary, the plates can be
located up to 1" back from the firing
end, but under no circumstances should
they be in front of the burner.