Eclipse Combustion AIRHEAT AH-MA - Manual (Page 9)

Eclipse AH-MA Air Heat Burner v2, Design Guide 160, 8/1/05 9
Design structure
Designing a burner system is a straight-forward exercise of
combining modules that add up to a reliable and safe system.
The design process is divided into the following steps:
1. Burner design
a. calculating the maximum input requirements
b. choosing design heat input at high fire
c. determining the length of burner needed
d. calculating the minimum input requirements
e. layout of the burner sections
f. sizing and layout of the gas manifold
g. sizing the profile plates
h. burner staging
2. Control methodology
3. Ignition system
4. Flame monitoring system
5. Gas valve train selection
Note:
Information in Data Sheet No. 160 is necessary to complete
some of the procedures.
D
ESIGN
System Design
3