Vertical Communications SCS 8324F - Manual (Page 111)

DSUII Attendant User’s Guide
August, 03 Comdial 101
8.6 System Speed Dial Numbers
You can store up to 99 system speed dial numbers from your
attendant telephone that every system user can access from his or her
telephone. Typically, these are numbers that are frequently called by
many different users and emergency numbers that you want readily
available to everyone.
• To program system speed dial numbers from the
attendant’s station,
1. PRESS INTERCOM.
2. DIAL *#02.
3. DIAL 01 to 99 to choose storage location.
4. DIAL # to clear current entry.
5. CHOOSE line that is to be used:
• DIAL 90 for no line assignment (system will choose last line used
at calling station or prime line if one is assigned to calling station)
• DIAL 01 to 24 for lines 1–24.
• DIAL 91 to 94 for line groups 1–4.
• PRESS INTERCOM for intercom line.
6. DIAL the number to be stored (32-digits maximum), PRESS HOLD
to store pause (if required), AND PRESS TAP to store flash (if
required).
7. PRESS TRNS/CONF to program a name:
• ENTER digits from the Letter Code Table on page 95 to spell name
(up to 16 characters allowed), OR
• PRESS TRNS/CONF again to leave name blank.
8. PRESS TRNS/CONF to save the number and name.
9. REPEAT above steps (beginning with choice of storage location) to
store all speed dial numbers.
10. PRESS SPEAKER to end.