Vertical Communications SCS 8324F - Manual (Page 42)

Making Calls GCA70-245
32 Comdial August, 03
3.4 Redialing
3.4.1 REDIAL - LAST-DIALED NUMBER
The system provides each station with a last number redial feature.
This feature saves 16 digits of the last outside number dialed at the
station. A newly dialed number always replaces a previously dialed
number. When you press the last number redial button, the system
will choose a line and redial the saved number.
• To redial the last-dialed
number,
1. PRESS SPEAKER OR HANG UP
handset to disconnect current ringing
or busy tone.
2. DIAL #.
3. LISTEN for ringing or busy tone over
the telephone speaker:
3.4.2 AUTOMATIC REDIAL
• To redial the number once a minute for 10 minutes,
1. SELECT ARDL OR PRESS programmed AUTOMATIC REDIAL
button. (See page 67 for directions on programming an Automatic
Redial button.)
2. The number will be dialed once a minute for 10 minutes (INTER-
COM light flashes).
3. Listen for ringing or busy tone over the monitor speaker.
• To cancel this automatic redial action,
1. LIFT AND REPLACE handset OR, USE the telephone for some
other function.
2. The INTERCOM light then turns off and the phone returns to idle.
NOTE: You must pick up the handset once the call is connected,
or the system will disconnect the call after 30 seconds.
918045551212
ARDL SAVE
Automatic Redial Option