Vertical Communications SCS 8324F - Manual (Page 87)

DSUII Attendant User’s Guide
August, 03 Comdial 77
Zone paging allows groups of stations to receive announcements
through the station speakers. Your system installer can enable zone
paging in up to four different zones. Zone paging can also be received
at the paging port where it can be connected to the input of an
external paging amplifier. Installer’s control the ability of each station
to originate and/or receive a page and the arrangement of the paging
into different zones.
• If your system provides all-call or zone paging,
1. LIFT handset.
2. PRESS INTERCOM.
3. DIAL 87 for all-call, OR DIAL 84, 85, or 86 for zone 1, 2, or 3.
4. MAKE announcement.
5. STAY on line if awaiting a reply (known as Meet-Me page), OR
HANG UP to end.
You can dial a special code number in response to an all-call or zone
page and be connected to the paging party in a private conversation.
All-call or zone paging is provided to the stations through the station
class of service programming.
• To make a reply to a Meet-Me page,
1. LIFT handset of nearest telephone.
2. PRESS INTERCOM.
3. DIAL 88.
4. Meet paging party on line.