Compaq 340622-002 - Manual (Page 13)

2-1 Drive Installation
Compaq SLR Tape Drive User Guide
Chapter 2
Drive Installation
This chapter provides instructions for installing the drive in:
■ The removable media bay of a workstation or server
■ An external storage unit
NOTE: For the remainder of this user guide, “system” will be used in place of
“workstation” and/or “server”.
Requirements
The user should be aware of the following installation requirements:
Tools
■ Torx T-15 screwdriver
■ Compaq SmartStart and Support CD
Controller
Compaq recommends equipping your system with either a 32-Bit Fast-SCSI-2
Controller or a more current device that provides full support for the Compaq
SLR Drive.
Software
See Chapter 3, “Installing the Software Drivers” to obtain information on what
software you need and where to obtain it.