Compaq 340622-002 User Manual
Page 50
Advertising
5-9
Troubleshooting
Compaq SLR Tape Drive User Guide
The following are examples of Stop messages:
■
‘The tape device reported an error on a request to read data from tape.
Error reported: Bad data.’
■
‘Tape device “Archive 1” reported an error on a request to write data to
tape. Error reported: Hardware error.’
■
‘The device, \Device\Tape0, is not ready for access yet.’
To obtain detailed information on an error reported to the System Event Log,
use the following procedure:
1. Start the NT Event Viewer.
2. Select the Log drop-down menu.
3. Select
System.
4. Highlight the entry for the tape drive to obtain the appropriate Event
Detail display.
Figure 5-3. A typical Event Viewer display
Advertising