Compaq 340622-002 - Manual (Page 36)

4-3 Operating and Cleaning the Drive
Compaq SLR Tape Drive User Guide
Meaning of Front Panel LED Display continued
LED Display Meaning
STEADY AMBER A media or hardware error has occurred.
To recover from this error the user should remove the
cartridge and reset the drive (either by using the
application software or by toggling the drive’s power OFF
then back ON.)
This error may indicate that the drive needs to be cleaned
or that the cartridge is defective.
BLINKING AMBER The drive has detected an exhausted cleaning cartridge.
The user should remove and discard this cartridge.
STEADY RED A fatal error has occurred.
This error typically indicates that there is a problem with
the drive. If this is a hard error, the user must replace the
drive.
BLINKING RED This is associated with drive selftests which are beyond the
scope of this guide.
Front Panel Controls
The front panel includes the cartridge ejector button. (See Figure 4-1.) Use the
ejector button to remove cartridges from the drive.
NOTE: The drive does not eject cartridges automatically.