Clarion VRX938R - Manual (Page 16)

20
VRX938R
English
Owner’
s manual
Basic Operations
Adjusting the Z-enhancer
Note:
• This function is enabled only when the panel is open.
1. Press the [A-M] button to change into the AU-
DIO-MODE display.
2. Touch the [Z-EHCR LV] key when the AUDIO-
MODE screen is being displayed to show the
Z-ENHANCER level adjustment screen.
3. Touch the [ w ] or [ z ] key to adjust to the de-
sirable level.
∗
When type 1 is selected, you can adjust the bass
in the range of ±2.
∗
When type 2 is selected, you can adjust the
treble in the range of ±2.
∗
When type 3 is selected, you can adjust the bass
and treble in the range of ±2.
4. When adjustment is finished, touch the [RTN]
key on the Z-ENHANCER level adjustment
screen to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗
To return from the Z-Enhancer level mode dis-
play to the STANDARD display, press the [A-M]
button once again.
Adjusting the bass and treble
Notes:
• This function is enabled only when the panel is open.
• This function can be adjusted only when the Z-en-
hancer is OFF.
1. Press the [A-M] button to change into the AU-
DIO-MODE display.
2. Touch the [BAS/TREB] key when the AUDIO-
MODE screen is being displayed to show the
BASS/TREBLE LEVEL adjustment screen.
3. Touch the [ w ] or [ z ] key to adjust to the de-
sirable BASS/TREBLE level (adjustment range:
from -6 to 6).
4. When adjustment is finished, touch the [RTN]
key on the BASS/TREBLE LEVEL adjustment
screen to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗
To return from the BASS/TREBLE LEVEL mode
display to the STANDARD display, press the [A-
M] button once again.
Adjusting the balance and fader
Note:
• This function is enabled only when the panel is open.
1. Press the [A-M] button to change into the AU-
DIO-MODE display.
2. Touch the [BAL/FAD] key when the AUDIO-
MODE screen is being displayed to show the
BALANCE/FADER adjustment screen.
3. Touch the [ Î ] or [ Å ] key to adjust to the desir-
able balance.
Adjusting range of the balance: left 13 to right
13
4. Touch the [ w ] or [ z ] key to adjust to the de-
sirable fader.
Adjusting range of the fader: front 12 / rear 12
5. When adjustment is finished, touch the [RTN]
key on the BALANCE/FADER adjustment
screen to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗
To return from the BALANCE/FADER mode dis-
play to the STANDARD display, press the [A-M]
button once again.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is recom-
mended to use the loudness effect.
∗
This function is enabled only when the panel is open.
1. Press the [A-M] button for 1 second or longer
to select Loudness ON. The “LD” indicator
lights in the display.
2. Press the [A-M] button for 1 second or longer
to select Loudness OFF. The “LD” indicator
goes off.
Note:
• When using a sold separately digital sound proces-
sor (DPH913) or DVD player (DVS970Z), a feature
called auto loudness is selected. This function is
different from the loudness effect. For further de-
tails on the auto loudness feature, refer to the sub-
section “Output adjustment of auto loudness,
subwoofer and playback band”.
CT (Clock Time) function
Note:
• This function is only available on the sub–LCD dis-
play with the panel close.
The CT function receives CT data sent from an
RDS station and displays the time. Press the