Clarion VRX938R - Manual (Page 24)

28
VRX938R
English
Owner’
s manual
CD/MD Changer
Operations
CD/MD changer functions
When an optional CD (MD) changer is connected
through the CeNET cable, this unit controls all CD
(MD) changer functions. This unit can control a
total of 2 changers (MD and/or CD).
Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD (MD) chang-
ers are connected, press the [FUNC] button to
select the CD (MD) changer for play.
∗
If “NO MAG” appears in the display, insert the maga-
zine into the CD changer. “LOADING” appears in
the display while the player loads (checks) the maga-
zine.
∗
If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
∗
If “NO DISC” appears in the display, load MDs into
the MD changer.
CD-ROM discs cannot be played in the CD
changer.
CAUTION
Pausing play
1. Press the [ s s s s s ] button for 1 second or longer
to pause play. “PAUSE” appears in the display.
2. To resume play, press the [ s s s s s ] button for 1
second or longer again.
∗
The same operation is also available using the
[
s ] key in the menu screen while in the CD/
MD changer mode.
Displaying CD titles (CD)
This operation is only possible when this unit is
connected with a CD-text compatible CD changer.
When a title is longer than 10 characters, the same
operation can be performed on a CD.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles al-
ready entered on MDs. Titles up to 256 charac-
ters long can be displayed by scrolling the titles.
∗
Titles cannot be entered for MDs with this unit.
When the panel is closed:
1. Press the [DISP] button to show the SUB dis-
play. The disc title or track title is displayed.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the display toggles
between the disc title and the track title.
● Scrolling a CD-text title
Note:
• This function is enabled only when the panel is open.
When a CD-text title is longer than 10 characters,
you can scroll the display as follows.
When the panel is open:
1. Display the CD-TEXT TITLE (disk & track &
artist).
2. Touch the [SCROLL] key to scroll the disc title.
3. To scroll the track title, touch the [TRACK
TITLE] key. (SCROLL key appears in the right
side of the TRACK TITLE.)
Touch the [SCROLL] key to scroll the track title.
4. To scroll the artist title, touch the [ARTIST
TITLE] key. (SCROLL key appears in the right
side of the ARTIST TITLE.)
Note:
• If the disc/track/artist title is shorter than 10 charac-
ters, the track titles begin to scroll immediately.
CD Operations