Clarion VRX938R - Manual (Page 36)

40
VRX938R
English
Owner’
s manual
Digital Radio/DAB Operations
3. When “PRESET” is selected, PTY preset
memory can be called for and stored.
4. Touch the preset No.1 to 6 key to call for the
preset PTY ITEM.
Touch the preset No.1 to 6 key for 2 seconds
to store the PTY ITEM currently selected to
any Preset No. selected.
5. When “ITEM SELECT” is selected, PTY se-
lection is carried out.
Touch the [ w ] key or [ z ] key to select PTY
ITEM.
Touch the [PTY ITEM] key to set the selected
PTY ITEM.
6. After adjustment is finished, touch the [RTN]
key to return to the STANDARD display.
Emergency broadcast
If an emergency broadcast is received, all the func-
tion mode operations are stopped. “ALARM” ap-
pears in the display and the emergency broad-
cast can be heard.
∗
RDS interrupt does not function during AM radio
reception or in TV mode.
● Cancelling an emergency broadcast
Touch the [DAB MODE] key in the MENU display
and the [AF] key appears in the display.
If you touch the [AF] key, emergency broadcast
reception is cancelled.
Volume setting of TA, emergency
broadcast (ALARM), information
and PTY
The volume for TA, ALARM, information and PTY
interrupts can be set during TA, ALARM or PTY
interrupts.
∗
The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, operate
the [VOL] button upward or downward to set the
volume to the desired level (00 to 33).
∗
When the TA, ALARM, information or PTY interrupt
ends, the volume returns to the level it had before
the interrupt.
Dynamic Label Function
A dynamic label (hereinafter referred to as “DLS”)
is a text data associated with each DAB service.
This set can display DLS up to 128 characters in
a display.
∗
This function is enabled only when the panel is open.
DLS display mode
Touch the [LABEL MODE] key in the MENU dis-
play and touch the [DYNAMIC LABEL] key to
place in the DLS display mode. To cancel the DLS
mode and return to the previous display, touch the
[RTN] key. If there is a DLS data in the reception
service, DLS text is displayed in the text display-
ing area.
DLS memory
Up to six DLSs, currently being received, can be
stored. Touch the [LABEL MODE] key in the
MENU display and touch the [DYNAMIC LABEL]
key. Touch the [P.ST] key and touch and hold the
[MEMO1] to [MEMO6] key for 2 seconds or longer,
and the DLS page currently being displayed is
stored.
DLS Calling
To call the DLS stored in the DLS memory, press
the [DIRECT] button. The DLS in the DLS memory
is displayed by 16 characters (2 lines) at the inter-
vals of 5 seconds (automatic calling). To display
at shorter intervals, press the [DIRECT] button
while waiting for successive DLS character string
to be displayed, the following DLS character string
is displayed (manual calling).