Clarion VRX938R - Manual (Page 33)

VRX938R
37
English
Owner’
s manual
Digital Radio/DAB Operations
About DAB programmes
The Digital Audio Broadcasting (hereinafter re-
ferred to as “DAB”) system transmits several
programmes on one frequency simultaneously, by
compressing audio signals.
∗
The group of programmes, which is transmitted on
a single frequency is called “ensemble”.
∗
Some DAB stations have several ensembles and
broadcast diversified programmes.
∗
The number of programmes and the contents which
an ensemble provides depend on the broadcast
stations and times. Since DAB programmes are
broadcast on several different frequencies, the same
programme can be enjoyed over large areas.
● A DAB station has multiple programmes on one
frequency.
● When you turn the unit on and select DAB mode,
the programme that starts is the one that was
selected before when the power was turned off.
If this programme is not available, another pro-
gramme is selected automatically.
● Programmes have their own names, just like PS
on RDS.
Note:
• For sophisticated audio quality, the receiver needs
to tune on a DAB Ensemble. While the receiver is
being tuned in to the DAB Ensemble, the Audio
outputs are muted. The tuning time is not fixed.
Listening to the DAB
1. Press the [FUNC] button and select the DAB
mode.
2. Press the right ( d ) or left ( a ) side of the
[SEARCH] button to tune in the desired sta-
tion.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [FUNC] button to select DAB mode.
2. Press and hold right ( d ) or left ( a ) for 1 sec-
ond or longer using the [SEARCH] button.
∗
The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.
Manual tuning
1. Press the [FUNC] button to select DAB mode.
2. Press and hold the [BAND] button for 1 sec-
ond or longer.
3. Select right ( d ) or left ( a ) to select a station
using the [SEARCH] button.
∗
The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds or longer.
Recalling a preset station
This unit has another preset memory function for
DAB stations. Up to 18 stations (6 for each [MEM1],
[MEM2] and [MEM3]) can be preset in the [DI-
RECT] buttons.
1. Press the [FUNC] button to select DAB mode.
2. Press the [BAND] button to select anyone of
[MEM1], [MEM2] and [MEM3]. Each time you
press the [BAND] button, the display changes
in the following order:
[MEM1] ➜ [MEM2] ➜ [MEM3] ➜ [MEM1]...
3. Press the corresponding the [DIRECT] button
to recall the stored station.
Note:
• Press and hold one of the [DIRECT] buttons for 2
seconds or longer to store that station into preset
memory.
Manual memory
1. Press the [FUNC] button to select DAB mode.
2. Press the [BAND] button to select anyone of
[MEM1], [MEM2] and [MEM3].
3. Select the desired station using seek tuning,
manual tuning or preset tuning, using the
[SEARCH] button.
4. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current sta-
tion into preset memory.
Switching programmes
1. Press the [FUNC] button to receive a DAB sta-
tion.
2. Select right ( d ) or left ( a ) to switch
programmes in a DAB station using the
[SEARCH] button.
Note:
• Programmes may not be switched depending on
DAB station or broadcasting time.