Country Flame CF-04 User Manual
Page 2
Version 2.0e
2
SAFETY NOTES
The Crossfire Model CF-04 biomass fuel stove is significantly different from a conventional wood-burning
stove. One major difference is that the CF-04 requires a reliable source of electrical energy to properly
operate. The owner, installer, and operator must understand this manual and read it in its entirety.
Understanding this manual should be completed and followed before installation or operation of the CF-04
is attempted. Failure to follow installation and operation instructions or perform necessary maintenance
can result in property damage, bodily injury, or even death. Country Flame strongly recommends that a
certified professional install the Crossfire Model CF-04.
W
ARNING
:
THE AUTHORITY HAVING JURISDICTION (
such as a municipal building
department, fire department, or fire prevention bureau, etc
) SHOULD BE CONSULTED
BEFORE BEGINNING INSTALLATION. A PERMIT MAY BE REQUIRED IN
ORDER TO PERFORM INSTALLATION.
W
ARNING
:
A smoke detector is recommended to be installed in the vicinity of the Crossfire CF-04.
W
ARNING
:
Country Flame Technologies has no control over installation or maintenance procedures;
therefore, Country Flame grants no warranty, implied or written, for the installation or
maintenance of the CF-04. Further, Country Flame assumes no responsibility for any
consequential damage resulting from said installation or maintenance of this product.
W
ARNING
:
After operation, always allow the Crossfire stove to completely cool before performing
any maintenance operations.
W
ARNING
:
The Crossfire stove requires reliable electric energy to properly operate. If electrical
power is not available, DO NOT operate the Crossfire with only a natural draft.
W
ARNING
:
Only a certified professional should install a Crossfire stove. Only a qualified service
technician should perform maintenance on the Crossfire. Parts removed for installation or
servicing must be replaced prior to operational use of this stove.
W
ARNING
:
Modification of the Crossfire is not authorized and any modification to the Crossfire voids
Country Flame’s product warranty.
W
ARNING
:
The Crossfire must be connected to a code compliant grounded 120-volt, 15 ampere, and
60 hertz electrical outlet. Use of a dedicated circuit is recommended. NEVER use an
adapter, extension cord or cut or remove any prong from the power cord.
W
ARNING
:
NEVER place or store any combustible or flammable products on or near the Crossfire.
W
ARNING
:
The Crossfire is designed to shutdown in the event the front door is opened. Keep the
viewing door tightly closed during operation. Always clean the Crossfire after the stove
has been allowed to return to normal room temperature.
W
ARNING
:
Do not connect the Crossfire to a chimney flue serving another stove of any type and
never install a flue damper in the exhaust system of the Crossfire.
W
ARNING
:
FOLLOW all operating instructions in this manual. Short cuts in operating procedures,
of any kind, can be dangerous.