Connecting communications ports, Connecting communication ports to other devices, Installing and connecting communication options – Compaq R6000 Series User Manual
Page 43: Figure 2-14. connecting a de9 communication cable
2-18 Compaq R6000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Dan Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: revised as per A. May
Part Number: 347223-022 File Name: c-ch2.doc Last Saved On: 3/24/99 1:41 PM
Connecting Communications Ports
CAUTION: To avoid damage to the equipment, only use the communications
cables with the part number:
295245-004 (Twelve-foot interface cable)
One is supplied with your kit. This UPS/Computer Interface Cable carries power
and is specifically designed for UPS communications.
Connecting Communication Ports to Other Devices
Connect Port 1 of the UPS communication ports to the appropriate
communication port on the host computer using a UPS/Computer Interface
Cable.
In a single host computer setup, Port 2 is used for additional power
management applications, such as Compaq Power Management Software,
LanSafe III, FailSafe III, and OnliNet.
NORMAL
BYPASS
138425244-001 R
EV. P
00
1
&
4
2
1
4
2
3
5
5
5
5
3
3
2
2
2
3
1
1
1
4
4
4
3
Figure 2-14. Connecting a DE9 communication cable
Installing and Connecting Communication Options
Option boards for the Compaq R6000 UPS include the Compaq Multi-Server
UPS Card, the Compaq Scalable UPS Card, and the Compaq SNMP-EN
Adapter. When using any of the Compaq option boards to expand the
capabilities of the Compaq R6000 UPS, install the options using the
instructions included with those kits.