Disposing of used batteries, Care and storage of batteries – Compaq R6000 Series User Manual

Page 88

Advertising
background image

5-10 Compaq R6000 Series UPS Operation and Reference Guide

Compaq Confidential – Need to Know Required

Writer: Daniel E. Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: revised as per A. May

Part Number: 347223-022 File Name: f-ch5.doc Last Saved On: 3/24/99 1:58 PM

Disposing of Used Batteries

The replacement battery kit includes the instructions and packaging required to
return used batteries to the appropriate location for disposal.

Do not dispose of used batteries with general office or household
waste. Return the used module for proper disposal to either:

Compaq, your authorized Compaq Partners, or their agents

A recycling center that meets all local environmental
standards.

Pb

Care and Storage of Batteries

To maximize the life of Compaq R6000 UPS batteries:

Minimize the amount of time the UPS is using battery power. Match
the UPS input voltage range configuration with your utility voltage.
Refer to the section, “Using the LCD Menu to Configure the R6000,”
in Chapter 4 for more information.

Keep the area around the UPS clean and dust-free. If the environment is
very dusty, clean the outside of the UPS regularly with a vacuum
cleaner.

Maintain the ambient temperature at 25

o

C (77

o

F).

If storing a UPS for an extended period, recharge the batteries every six
months:

a.

Connect your UPS to utility power; refer to Chapter 2,
“Installation.”

b.

Allow the UPS to remain in Standby mode. (See Chapter 3,
“Operation”)

c.

Let the UPS run to charge the batteries for 24 hours.

d.

Update the Battery Recharge Date label.

Advertising