Shutting down the system – Compaq R6000 Series User Manual

Page 55

Advertising
background image

3-6 Compaq R6000 Series UPS Operation and Reference Guide

Compaq Confidential – Need to Know Required

Writer: Daniel E. Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: revised as per A. May

Part Number: 37223-022 File Name: d-ch3.doc Last Saved On: 3/24/99 1:39 PM

Battery Mode

Yellow LED 2 is on.

Batteries are not being charged.

Power is available at UPS outputs.

Shutdown process has begun.

Sleep Mode

All LEDs are off.

This mode is optional and can be enabled or disabled using the
LCD menu. The default value for Sleep mode is “disabled.” If
SLEEP MODE is enabled, the UPS shuts down when on battery
power and the load is less than 8%.

Power is automatically restored to the output receptacles when
utility power is restored.

Shutting Down the System

To shut down the system:

1.

Place the UPS on Standby.

2.

Disconnect the mains by opening switch or circuit breaker at the utility panel.

Advertising