Compaq R6000 Series - Manual (Page 63)

4-6 Compaq R6000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Daniel E. Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: Revised as per A. May
Part Number: 347223-022 File Name: e-ch4.doc Last Saved On: 3/24/99 1:44 PM
Status
Main Menu
→
Status
The first choice on the Main Menu is “Status.” Pressing the Enter button when
“Status is displayed leads to the following sub-menu choices:
UPS Status + Load Segment status
This shows that the UPS has detected no problems. In this example, load
segments 1, 4 and 5 are ON. Segments 2 and 3 are OFF.
System Normal
ON: 1 - - 4 5
UPS Status + Active Alarm Count
In this example, the UPS has detected no problems and there are no alarms.
System Normal
0 Alarms
On Battery
The UPS has switched from utility voltage input to battery power. “X” is the
number of alarms.
On Battery
X Alarms
On Bypass
The UPS has been placed in Bypass mode. “X” is the number of alarms
triggered when the UPS was switched to Bypass mode.
On Bypass
X Alarms