Compaq R6000 Series - Manual (Page 71)

4-14 Compaq R6000 Series UPS Operation and Reference Guide
Compaq Confidential – Need to Know Required
Writer: Daniel E. Lyons Project: Compaq R6000 Series UPS Operation and Reference Guide Comments: Revised as per A. May
Part Number: 347223-022 File Name: e-ch4.doc Last Saved On: 3/24/99 1:44 PM
Load Control
This Main Menu selection allows the load segments to be turned On and Off.
Main Menu
→
Load Control
When selected from the Main Menu by pressing the Enter button, Load
Control displays the current status of the load segments, and allows selection
of a segment using the Center button to navigate and the Enter button to select.
Load Control
ON :1 2 3 – 5
When a segment is selected, a confirmation display appears.
Load Control
On 1 ON N ?
In this example, the “N” can be changed to a “Y” by using the Center button,
pressing the UP/DOWN arrows; pressing the Enter button to selects the value.
The display then reflects the changes, if any. In this case, there are no changes
and the status display reappears:
Load Control
ON :1 2 3 – 5
Display Test
In this Main Menu selection, all pixels are lit to test the LCD display.
“Compaq UPS Display Test” scrolls across the screen in both upper and lower
display lines. The Escape button is used to exit from this test.



COMPAQ UPS















DISPLAY TEST