KERN & SOHN ABT 220-5DM - Manual (Page 32)

ABT-BA-e-1312 32
10.2 Balance ID Number Setting
This setting is for the balance ID number that is output along with the adjustment re-
port.
Press the [CAL] key repeatedly until "SettinG" appears.
Press the
[TARE]
key. The display shows “CAL dEF”.
Repeatedly actuate the [CAL] key until "id:****" appears (The ∗∗
symbolise the current setting).
Press the [TARE] key. In the upper part of the display panel, the
symbol and the # symbol appear in order to indicate numer-
ical input status. The leftmost digit of ∗∗∗∗ blinks. The numeral of
the blinking digit can be changed.
When the [UNIT] key is pressed, the numerical of the blinking digit
increases by 1 at a time. You can determine the value of the flash-
ing digit, or shift the flashing digit by one position to the right, by
pressing the [PRINT] key. Confirm your setting by pressing the
[TARE]
key.
Actuate the [ON/OFF] key repeatedly. Return to menu/weighing
mode.