KERN & SOHN ABT 220-5DM - Manual (Page 61)

ABT-BA-e-1312 61
Confirm your selection by pressing the [TARE] key. Printout "----
---- ADDON MODE ---------" takes place.
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode. Whilst the add-on function is active, the
display keeps showing the add-on symbol [ ].
Add up:
Operation Display
When using a container, place this on the weighing plate and
tare.
Prior to weighing the component press the [PRINT] key 1x.
Weigh first component.
5.0003 g
Wait until standstill display ( ) appears, the weighing value for
the first component (CMP001) will be issued automatically to the
optional printer. This is followed by automatic taring.
0.0000 g
Weigh second component
5.0017 g
Wait until standstill display ( ) appears, the weighing value for
the second component (CMP002) will be issued automatically to
the optional printer. This is followed by automatic taring.
0.0000 g
Weigh third component
5.0010 g
When the last single weighing process is finished, press the
[ON/OFF]
key to receive the total sum ("TOTAL=").
15.0030 g