KERN & SOHN ABT 220-5DM - Manual (Page 66)

ABT-BA-e-1312 66
C02 High-stability mode setting
C13 Anti-convection mode setting
C14 Standard mode setting
C05
Standstill display,
setting to 1 count
C06
Standstill display,
setting to 5 count
C15
Standstill display,
setting to 10 count
C07 Auto Zero on
C08 Auto zero off
C10 Autom. CAL on
C11 Autom. CAL off
C17 Display setting status
Measurement conditions set by menu selection in abbre-
viated form is output.
15.4 Standard Settings
Display
for menu
selection
Baud
Rate
Delimiter
Parity
(Bit
length)
Stop bit
Data
format
Hand-
shake
Standard set-
ting 1
iF:F1 1200 C/R None (8) 1 dF1 Hardware
Standard set-
ting 2
iF:F2 1200 C/R None (8) 1 dF2 Hardware
Standard
setting 3
iF:F3 2400 C/R+L/F Even (7) 1 dF3 Hardware
Standard set-
ting 4
iF:F4 1200 C/R+L/F Odd (7) 1 dF4 Hardware
Operator
settings
(see 15.5)
iF:USEr
User
settings
User
settings
User
settings
User
settings
User
settings
User set-
tings
KERN–
YKB-01N
iF:USEr 1200 C/R None (8) 1 dF1 off
Selecting one of standard Settings:
Repeatedly press the [CAL] key until "intFACE" appears.
Press [TARE] key
Repeatedly press the [CAL] key until the desired standard setting
appears.
Confirm your selection by pressing the [TARE] key.
Repeatedly press the [ON/OFF] key. The balance returns to toler-
ance weighing mode.