KERN & SOHN ABT 220-5DM - Manual (Page 39)

ABT-BA-e-1312 39
12.3 Call up menu
Please have a go and try to change a function yourself. Change the "Auto-Zero"
function to OFF and then again to ON.
 Turn on balance by pressing the ON/OFF key.
 Actuate the CAL key until FUnC.SEL appears
 Press the TARE key once until CAL appears
 Press the CAL key once until trC :on appears
 To confirm, press the TARE key once.
"Auto-Zero” function is now selected.
The standstill display shows the current setting.
 Press the CAL key
thereby means:
trC-oF Auto-Zero is switched off
trC-on Auto-Zero is switched on
Select trC-oF
 Press the TARE key once
The colons appear when storing the changed trC: oF
 Press ON/OFF key
To quit the menu keep the ON/OFF
key pressed longer than 2 sec.
Note:
If you wish to make several changes in the weighing mode menu you do not have to
exit the menu after each change. You can make several changes one after the other
and finally exit the menu