KERN & SOHN ABT 220-5DM - Manual (Page 55)

ABT-BA-e-1312 55
Remove reference weight.
Now you can fill the items to be counted into the container.
The respective quantity is shown in the display.
Repeated pressing of the [UNIT] key changes the display value,
e. g.: [g] → [%] → [Pcs] → [ct]
Note:
Error message "Err 20" indicates that the weight for the reference piece number is
too low.
14.2 Percent determination
Percent weighing allows to display weight in percent, in relation to a reference
weight. The displayed weighing value is stored as a standard percent value
(default setting: 100%).
Condition:
Function "U- %" is activated (ch. 11.3)
(When PCS is used for the
first time)
Repeatedly press the [UNIT] key until the display is in percent-
age determination mode. The display symbol % pops up.
If you are using a weighing container use the [TARE] key for
taring.
Put on reference weight (=100%)
(minimum weight: Readability d x 100)
When standstill control ( ) is complete, press the [CAL] key.
The reference weight is saved.
Remove reference weight.
From now on the placed weight will be shown as %.
Repeated pressing of the [UNIT] key changes the display value,
e. g.: [g] → [%] → [Pcs] → [ct]